A sauna is one of the few home technologies you sit inside. For 20 to 45 minutes at a time, several times a week, you're surrounded by heaters, wiring and timber in a warm, enclosed space.
So the question isn't only how well a sauna heats. It's what else you might be exposed to while you’re inside the infrared sauna.
Most buyers compare size, wood and price. Less consider the sauna’s electromagnetic fields, the electrical certification behind the heaters, or what the cabin releases into the air once it's hot. Those are the details that separate a sauna built for wellness and health, from one that simply gets warm.
This guide explains what each safety standard means, what Clearlight's testing measures, and the questions worth asking any sauna brand before you buy.
Certified safe: every certificate, and what it covers
Every Clearlight sauna model is safety certified, and the certification covers the whole sauna, not just the heaters. Each certificate answers a different question: is it safe on the body, does it interfere with other electronics, and is it free of hazardous materials? Here's every one, and what it means for you. You can open each certificate from the links.
|
Certification |
What it covers |
Who issues it |
|---|---|---|
|
EMF levels in the seating area measured and confirmed |
VitaTech Electromagnetics |
|
|
Air quality in the cabin, tested regularly with results compiled and compared over time |
Third-party laboratories |
|
|
SAA Approvals (Australia and New Zealand) |
Electrical safety of the sauna room, tested to AS/NZS 60335.2.53, the Australian and New Zealand standard for sauna heating appliances |
SAA Approvals, a certifier accredited by JAS-ANZ |
|
The entire sauna tested to US and Canadian safety and performance standards |
Intertek, through its ETL mark, which has certified products for more than 100 years |
|
|
European health and safety requirements, covering electrical safety (the Low Voltage Directive) and electromagnetic compatibility |
Declared by the manufacturer against EU standards |
|
|
Restriction of Hazardous Substances: limits on materials such as lead and mercury in the electrical components |
Verified to RoHS standards and certified by East Testing |
|
|
The sauna's electronics, such as the controls and audio, don't cause harmful radio interference |
Tested to US Federal Communications Commission rules |
|
|
Timber from certified, responsibly managed sources, tracked by Chain-of-Custody from the tree to the finished sauna |
Forest certification with a certified Chain-of-Custody manufacturing process |
|
|
Material Safety Data Sheets confirming the glues, varnishes and wood sealers contain no toxic or hazardous materials |
Product safety documentation for each material |
Red Light Core Tower certificates
|
Certification |
What it covers |
Who issues it |
|---|---|---|
|
Electrical safety in Australia and New Zealand. |
Global-Mark |
|
|
Electrical safety in Europe. |
Shenzhen WST Testing |
|
|
Electromagnetic compatibility in Europe. |
Shenzhen BCTC Testing |
|
|
Restrictions on hazardous substances in Europe. |
Shenzhen BCTC Testing |
Halo One certificates
|
Certification |
What it covers |
Who issues it |
|---|---|---|
|
Regulatory compliance in Australia and New Zealand. |
ANZ Electrical Compliance |
|
|
Electromagnetic compatibility in Europe. |
Shenzhen BCTC Testing |
Safety built into every Clearlight sauna
The certificates are the proof, but the safety starts in the build:
-
Every heater is tested before it's fitted. Each True Wave™ heater is built one at a time and goes through hours of testing, including electrical draw, surface temperature and EMF output measured at 12 separate points. At Clearlight, we make our heaters ourselves. It costs more, but it lets every heater be built to the highest production standards and rated for up to 35,000 operating hours. Each one is engineered for human use, finely tuned to 9.4 microns.
-
Tempered safety glass. Doors and windows use tempered glass, which is much stronger than standard glass and breaks into small, blunt pieces rather than sharp shards.
-
Shielded, grounded wiring. All wiring runs through grounded metal conduit, and every electrical component is shielded (more on this below).
-
Non-toxic materials throughout. The panels are joined with water-based, non-toxic glues, so there's no chemical out-gassing. Timbers are kiln-dried for a chemical-fee experience.
-
Installed to suit your home. Larger models may need a dedicated 15 or 20 amp circuit. A licensed electrician should always confirm your home's electrical setup before installation.
EMF and ELF: the invisible part of every sauna
Anything that runs on electricity gives off an electromagnetic field (EMF). Extremely low frequency fields (ELF) are a related type, the same kind you'd pick up standing near a power line.
In most appliances this barely matters, because you're not sitting right next to them for half an hour. In a sauna, you are. You're surrounded by heaters, often within centimetres of them, so the level of EMF and ELF where you sit matters.
What Clearlight's testing found
Clearlight's True Wave™ heaters use patented technology designed to cancel out both EMF and ELF. In testing, EMF in the seating area averaged under 1 milligauss, which is virtually undetectable. These measurements were verified by VitaTech Electromagnetics.
Every sauna gives off some EMF, but Clearlight is one of the only companies with 0 EMF where you sit. The sauna is optimised so the field is cancelled out in the seating area, right where your body is.
ELF results tell the same story, measured against the threshold of concern:
|
Measurement |
Threshold of concern |
Clearlight |
Competitor saunas tested |
|---|---|---|---|
|
ELF with a person seated |
1,000 mV |
200 mV (5 times below) |
20,000+ mV (20 times above) |
|
ELF in an empty sauna |
10 V/m |
3.4 V/m (about 3 times below) |
300+ V/m |
ELF levels vary greatly depending on where they're measured. Wiring, appliances and the building itself all affect the reading, and some homes simply have higher background ELF than others. Treat these figures as a guide to how the sauna performs, not an exact reading for every space.
Clearlight's True Wave™ heaters were the first low-EMF carbon-based heaters on the market. Clearlight then went further and pioneered shielding against both EMF and ELF, the approach much of the industry has tried to follow since.
Why the wiring matters too
Low-EMF heaters are only half the job. The electrical wiring in every Clearlight sauna runs through grounded metal conduit, and the wires inside are twisted, which cancels out more of the field.
Every electrical component is then shielded and grounded, including a carbonised heater safety mesh that removes any remaining ELF. The result is the lowest EMF and ELF levels the design allows, right where you sit.
Why ELF is the number to ask for
"Low EMF" now appears on almost every infrared sauna listing. But most brands only publish one figure: the magnetic field from the heaters, in milligauss.
ELF is the electric field from the wiring that powers them, and it's a separate measurement. A sauna can have a low magnetic reading and still expose you to a high electric field if its wiring isn't shielded.
That's why Clearlight engineers for both. Shielding against EMF and ELF isn't an upgrade or an optional extra. It's built into every Clearlight sauna as standard, and Clearlight publishes its ELF results, measured both with a person seated and in an empty cabin.
If a brand gives you a low EMF number but can't tell you its ELF reading, you only have half the picture.
VOCs: what's in the air you breathe
Volatile organic compounds (VOCs) are gases released by some glues, finishes and treated materials, and heat makes them release faster. In a sealed, warm cabin where you're breathing deeply, that matters more than it would in an open room.
Clearlight saunas are designed and built to be free of harmful VOCs. Independent third-party labs test them regularly, and the results are compiled, compared and recorded over time. That way the air in the cabin is checked again and again, not just once at launch.
Timber dried the slow way
The timber matters as much as the heaters, because it surrounds you on every side and heats up with the cabin.
-
Every Clearlight cabin is currently built from Eco-Certified, grade A Okume timber.
-
The timber is both kiln dried and air dried to a 7% moisture content, and each panel is pressed so it stays free of warping and cracking for life.
-
The panels are then joined with water-based, non-toxic glues, so there's no chemical out-gassing.
Not every sauna is built this way.
Some use timber treated with chemical preservatives, or plywood and particleboard held together with formaldehyde-based adhesives, often in hidden areas such as the roof, floor or backing panels. At room temperature these materials release chemicals slowly. In a sealed cabin heated to 50–65°C, the heat speeds that release up, and the cabin traps it in the air you're breathing.
That's why timber shortcuts are a false economy in a sauna. Treated or composite wood might cost less to build with, but you pay for it in air quality, session after session.
Six questions to ask any sauna brand
A sauna is a long-term investment in your health, so it's worth asking for evidence before you buy. Whichever brand you're considering, ask:
-
Can I see your electrical safety certificate? In Australia, look for independent certification to AS/NZS 60335.2.53, the local standard for saunas, not just a claim that the sauna is safe.
-
What are your EMF and ELF readings, and where were they measured? Many brands publish only the EMF figure. Ask for both, measured in the seating area where your body is.
-
Who verified those readings? In-house testing is a start. Independent verification is what you can rely on.
-
How do you shield the wiring? Low-EMF heaters with unshielded wiring only solve half the problem.
-
How is the timber dried, and what holds the panels together? Look for kiln-dried, untreated solid timber and non-toxic glues, with no plywood or particleboard hidden in the build.
-
Do you test for VOCs, and how often? One test at launch tells you less than ongoing third-party testing.
A brand that's confident in its saunas will answer all six, with certificates to back them up.
Talk it through with us
You should feel completely at ease every time you step into your sauna. If you'd like to see the certificates, or talk through which Clearlight sauna suits your space, book a free consultation with our team. We'll answer every question, including the six above.






